Volume 4 issue 1 (2024)

Aghazadeh, M., Karimzadeh, I. (2024). 'Electrochemically grown superparamagnetic Co-Fe3O4 nanoparticles onto functionalized graphene oxide for biomedical aims', Progress in Physics of Applied Materials, 4(1), pp. 1-6. doi: 10.22075/ppam.2024.32630.1076

Ghafari-Mofrad, M., Mosadeq, H., Zare, M. (2024). 'Competition between Heisenberg and bond-dependent interactions driven an incommensurate ordering in honeycomb cobaltates', Progress in Physics of Applied Materials, 4(1), pp. 7-12. doi: 10.22075/ppam.2024.32866.1081

FarhadiKoutenaei, A., Ali Mahdi, M., Bahari, A., Al-Jelif, A. (2024). 'Different behavior of Nano sheet and Bulk of the hexagonal boron nitride with first principal calculation approach', Progress in Physics of Applied Materials, 4(1), pp. 13-19. doi: 10.22075/ppam.2024.33062.1086

Shokri, A. J. (2024). 'Numerical study of frequency effect on induction heating process in three dimensional', Progress in Physics of Applied Materials, 4(1), pp. 21-26. doi: 10.22075/ppam.2024.32977.1083

Ahmadi, M., Nasehnejad, M. (2024). 'Morphological and multifractal studies of nanocrystalline Au films', Progress in Physics of Applied Materials, 4(1), pp. 27-35. doi: 10.22075/ppam.2024.32997.1084

Hashemi, A., Tavafi, H., Naseri, M., Mojtabazadeh, H., Abedi, M., Tork, N. (2024). 'Structural and antibacterial properties of AgFe2O4 and Fe3O4 nanoparticles, and their nanocomposites', Progress in Physics of Applied Materials, 4(1), pp. 37-46. doi: 10.22075/ppam.2024.33349.1091

Vazirinezhad, K., Shariatmadar Tehrani, F., Zeinali, S. (2024). 'Porosity and morphology control of mesoporous Cu-BTC Metal-Organic Framework microparticles', Progress in Physics of Applied Materials, 4(1), pp. 47-58. doi: 10.22075/ppam.2024.33337.1090

Eshghi, M., Alipoor, M. (2024). 'A Comprehensive Study of Gamma-rays Shielding Features of Binary Compounds', Progress in Physics of Applied Materials, 4(1), pp. 59-67. doi: 10.22075/ppam.2024.32949.1082

Hekmatifar, M., Toghraie, D., Sabetvand, R., Esmaeili, S. (2024). 'Molecular dynamics simulation of temperature effects on the mechanical properties of Carbon polycrystalline', Progress in Physics of Applied Materials, 4(1), pp. 69-76. doi: 10.22075/ppam.2024.33046.1087

Chireh, M., Naseri, M., Rahimi, M., Solymani, A. R. (2024). 'Synthesis ZnO/RGO nanocomposite: Structural characteristics and antifungal/antibacterial properties', Progress in Physics of Applied Materials, 4(1), pp. 77-81. doi: 10.22075/ppam.2024.33663.1094

Kimiagar, S., Mirazimi, H. (2024). 'Hydrothermal synthesis of Fe3 O4-ZnO nanocomposites for removing fluoride from water', Progress in Physics of Applied Materials, 4(1), pp. 83-91. doi: 10.22075/ppam.2024.33571.1092

Admi, R., Kurniawan, B., Saptari, S., Yudharma, G., Munazat, D. (2024). 'Effect of Sintering Temperature on Phase Characteristic and Grain Size of La0.7AE0.3MnO3 (AE=Ba/Ca/Sr) Ceramics Prepared by Sol-Gel Method', Progress in Physics of Applied Materials, 4(1), pp. 93-101. doi: 10.22075/ppam.2024.33788.1096

Volume 3 issue 2 (2023)

Alamdari, S., Hemmati, M., Jafar Tafreshi, M., Ehsani, M. (2023). 'Erbium doped Barium Tungstate-Chitosan Nanocomposite: Luminescent Properties', Progress in Physics of Applied Materials, 3(2), pp. 119-123. doi: 10.22075/ppam.2023.31808.1065

Zare, M. H., Mosadeq, H. (2023). 'Doped t-J model of twisted bilayer WSe2', Progress in Physics of Applied Materials, 3(2), pp. 125-130. doi: 10.22075/ppam.2023.32414.1070

Hadidchi, S., Tavakoli, M. H. (2023). 'Influence of Temperature Dependence of Electrical Conductivity of Graphite Crucible in Czochralski Crystal Growth: A Numerical Analysis', Progress in Physics of Applied Materials, 3(2), pp. 131-139. doi: 10.22075/ppam.2023.32556.1073

Salmaniannezhad, H., Salmaniannezhad, H., Zarei Moghadam, R., Khani, M., Ardani, M., Shokri, B. (2023). 'Design and fabrication of multi-layers antireflection coating consisting of MgF2 and SiO2', Progress in Physics of Applied Materials, 3(2), pp. 141-146. doi: 10.22075/ppam.2023.32214.1067

Annamalai, S., Ramasamy, R. P. (2023). 'Chitosan - Carbon Nanotube - Maghemite nanocomposites – A Flexible Negative Dielectric Constant Material', Progress in Physics of Applied Materials, 3(2), pp. 147-158. doi: 10.22075/ppam.2023.31641.1064

Jamshidi Zavaraki, A., Huang, J., Xu, B., Sun, L., Agren, H. (2023). 'Strategies to Improve Photovoltaic Performance of “Green” CuInS2 Quantum Dots', Progress in Physics of Applied Materials, 3(2), pp. 159-168. doi: 10.22075/ppam.2023.32263.1068

Kalami, R., Ketabi, S. A. (2023). 'Comparison of thermoelectric properties of armchair germanene nanoribbon and armchair germanene nanomesh', Progress in Physics of Applied Materials, 3(2), pp. 169-176. doi: 10.22075/ppam.2023.32472.1072

Fakharpour, M., Gholizadeh Arashti, M., Hesami Tackallou, S., Zamani, B. (2023). 'Surface characterization of Al thin film dependent on the substrate using fractal geometry', Progress in Physics of Applied Materials, 3(2), pp. 177-183. doi: 10.22075/ppam.2023.32439.1069

Sarmalek, M. S., Adelifard, M. (2023). 'Influence of Zinc Concentration and Sulfurization on the Physical Properties of CZTS Thin Films: Synthesis and Characterization', Progress in Physics of Applied Materials, 3(2), pp. 185-194. doi: 10.22075/ppam.2023.32622.1077

Farahmandzadeh, F., Ahmadibagheri, G., Khoshghamat, A., Molahosseini, E., Molaei, M. (2023). 'Application of CdTe/CdS/ZnS core/multi-shell QDs as a high-performance nanocatalyst for degradation of methylene blue from water', Progress in Physics of Applied Materials, 3(2), pp. 195-201. doi: 10.22075/ppam.2023.32683.1078

Khaleghi, H. (2023). 'Synthesis of CuO and Ce-doped CuO nanosheets; characterization, optical and magnetic properties', Progress in Physics of Applied Materials, 3(2), pp. 203-209. doi: 10.22075/ppam.2023.32447.1071

Salehi, S., Karimzadeh, I. (2023). 'A Graphene and Nickel-Cobalt Metal Organic Framework Composite as a high-performance electrode material for supercapacitor application', Progress in Physics of Applied Materials, 3(2), pp. 211-216. doi: 10.22075/ppam.2023.32594.1075

Volume 3 issue 1 (2023)

Mahadevan, C.K. (2023). 'Preparation and properties of polycrystalline aggregates of simple and hybrid alkali halides – An overview', Progress in Physics of Applied Materials, 3(1), pp. 1-5. doi: 10.22075/ppam.2023.30529.1055

Monavari, S. M., Memarian, N. (2023). 'Electronic structure engineering of diamond nanowires by studying the effects of substitution and growth orientation', Progress in Physics of Applied Materials, 3(1), pp. 7-13. doi: 10.22075/ppam.2023.29929.1052

Haghir Ebrahim Abadi, A., Bagheri-Mohagheghi, M. M. (2023). 'Study of structure, morphology, optical absorption, and gap modulation of Activated carbon (AC) / NiO, Fe3O4, and Co3O4 oxide nanocomposites', Progress in Physics of Applied Materials, 3(1), pp. 15-28. doi: 10.22075/ppam.2023.30469.1054

Mansourian, M., Alamdari, S. (2023). 'Fabrication and Investigation on Luminescence Properties of Bi2WO6 Microfibers via Stretching Process', Progress in Physics of Applied Materials, 3(1), pp. 29-33. doi: 10.22075/ppam.2023.29403.1050

B, S. I. L., Muthu, S. P., P, K., P, R. (2023). 'Crystal growth and characterization of 2-amino-4,6-dimethylpyrimidium 3,5-dinitrobenzoate dihydrate (2APDBD) single crystal for Nonlinear optical (NLO) application', Progress in Physics of Applied Materials, 3(1), pp. 35-41. doi: 10.22075/ppam.2023.31236.1058

Faripour, H., Khodadoost, E., Faripour, Y. (2023). 'The fluctuations of Zn impurity Concentration Profile in KCl crystals growth by various pulling rate Czochralski method', Progress in Physics of Applied Materials, 3(1), pp. 43-47. doi: 10.22075/ppam.2023.30941.1056

saidi, M., Ghazi, M., Izadifard, M. (2023). 'A Study on Structural, Optical, and Magnetic Properties of ZnO/ZnFe2O4 Composite', Progress in Physics of Applied Materials, 3(1), pp. 49-55. doi: 10.22075/ppam.2023.30980.1057

Khan, N., Vijayan, N., Kumar, R., Gupta, N., Pant, R. (2023). 'Preparation of Indian Reference Material for the calibration of Powder X-ray Diffractometer: α-Alumina', Progress in Physics of Applied Materials, 3(1), pp. 57-65. doi: 10.22075/ppam.2023.31242.1059

Fallah Samakosh, S., Bahari, A., Fallah Hamidabadi, V., Milani Moghaddam, H. (2023). 'Synthesis of coated iron oxide nanoparticles and feasibility study of their use in magnetic hyperthermia', Progress in Physics of Applied Materials, 3(1), pp. 67-72. doi: 10.22075/ppam.2023.31537.1061

Behrooz, B., Kordbacheh, A., Hashemianzadeh, S. M., Minbashi, M., Zahedifar, M. (2023). 'Investigation of CO2 and N2 adsorption on pristine and oxidized γ-graphyne using density functional theory (DFT): A First-principles analysis', Progress in Physics of Applied Materials, 3(1), pp. 73-81. doi: 10.22075/ppam.2023.31332.1060

Annamalai, S., Ramasamy, R. P. (2023). 'Chitosan – Graphite – Maghemite – a Flexible, Superparamagnetic Nanocomposite Comprising of Microcapacitors', Progress in Physics of Applied Materials, 3(1), pp. 83-103. doi: 10.22075/ppam.2023.31598.1063

Pourhadi, B., Jamali, M., Bahrami, Z., Shariatmadar Tehrani, F. (2023). 'Hydrothermal synthesis of WO3 nanorods: pH adjustment stage, additive comparison and photocatalysis activities', Progress in Physics of Applied Materials, 3(1), pp. 105-118. doi: 10.22075/ppam.2023.31891.1066

Volume 2 issue 2 (2022)

Kafi Ahmadi, L., Khademinia, S. (2022). 'Fabrication, characterization, and photocatalytic degradation of malachite green by CuO nanocatalyst', Progress in Physics of Applied Materials, 2(2), pp. 83-92. doi: 10.22075/ppam.2022.27812.1033

Minbashi, M., Yazdani, E. (2022). 'Effect of Cation and anion migration toward contacts on Perovskite solar cell performance', Progress in Physics of Applied Materials, 2(2), pp. 93-102. doi: 10.22075/ppam.2022.29018.1042

Modaresi, N., Kameli, P. (2022). 'Impact of nano-Micro Particle Size on Structural, Magnetic and Electrical Properties of La0.5Ca0.5MnO3 Manganites', Progress in Physics of Applied Materials, 2(2), pp. 103-112. doi: 10.22075/ppam.2022.28929.1037

Sabzevar, M., Solaimani, M. (2022). 'Effect of Barrier’s Geometry on the Transport Properties of Gaussian Wave-Packet in the Presence of Rashba and Dresselhaus Spin-Orbit Interactions: Comparison of High-Energy and Low-Energy Wave-Packets', Progress in Physics of Applied Materials, 2(2), pp. 113-121. doi: 10.22075/ppam.2022.28940.1038

Arabi, A., Fazli, M., Ehsani, M. (2022). 'Photocatalytic activity of the La.7Ca0.3MnO3 nanorods', Progress in Physics of Applied Materials, 2(2), pp. 123-131. doi: 10.22075/ppam.2022.29008.1041

Hoseini, S., Adelifard, M. (2022). 'Improving performance and stability of silver bismuth iodide solar cells using carbon nanotubes in the hole transport layer', Progress in Physics of Applied Materials, 2(2), pp. 133-138. doi: 10.22075/ppam.2022.28988.1040

Zarei Moghadam, R., Taherkhani, M. (2022). 'Oxygen and nitrogen doped diamond-like carbon thin films: A comparative study', Progress in Physics of Applied Materials, 2(2), pp. 139-146. doi: 10.22075/ppam.2022.29057.1043

Ghasemi, R., Naseri, M., Souri, D., Kamalianfar, A. (2022). 'Structural and physical properties of Co1-xCdxFe2O4 /SiO2 nanocomposites', Progress in Physics of Applied Materials, 2(2), pp. 147-156. doi: 10.22075/ppam.2022.28952.1039

Hekmatifar, M., Toghraie, D., Sabetvand, R., Esmaeili, S. (2022). 'Effect of Electric Field Magnitude on the Mechanical Behavior of Silicon-Doped Nanoporous Carbon Matrix by Molecular Dynamics Method', Progress in Physics of Applied Materials, 2(2), pp. 157-164. doi: 10.22075/ppam.2022.29073.1045

Sayyar, S., Aslibeiki, B., Asgari, A. (2022). 'CoFe2O4 bulk, nanoparticles and layer: A comparison of structural, magnetic, and optical properties', Progress in Physics of Applied Materials, 2(2), pp. 165-173. doi: 10.22075/ppam.2022.29079.1047

Hakimi, M., Asadian, A. R. (2022). 'Lattice ordering and magnetic structure of high moment Fe and Co based Heusler alloys prepared by mechanical alloying', Progress in Physics of Applied Materials, 2(2), pp. 175-182. doi: 10.22075/ppam.2022.29071.1046

Memarian, N., Farahi, E., Tobeiha, N., Concina, I. (2022). 'Effect of precursor on physical properties and photocatalytic activity of 2D g-C3N4 nanosheets', Progress in Physics of Applied Materials, 2(2), pp. 183-194. doi: 10.22075/ppam.2022.29345.1049

Volume 2 issue 1 (2022)

Shamsipoor, A. S., Bagheri-Mohagheghi, M. M., Mokaripoor, E. (2022). 'Structural, electrical and optical properties of SnO2: B transparent semiconducting thin films', Progress in Physics of Applied Materials, 2(1), pp. 1-10. doi: 10.22075/ppam.2022.26130.1023

Riahimadvar, M. S., Tajaldini, M. (2022). 'Near the Ablation Threshold of Copper Surface Which Irradiated by 10.6 µm CO2 Laser Beam', Progress in Physics of Applied Materials, 2(1), pp. 11-14. doi: 10.22075/ppam.2022.26415.1024

Cheraghchi, R., Rezvani Jalal, M., Pishdast, M., Abdikian, A. (2022). 'Simulation of Nanoparticles Growth Synthesized from Laser Ablation in Liquid by Electrical Charging Mechanism with and without Inclusion of Ion Drift Motion', Progress in Physics of Applied Materials, 2(1), pp. 15-19. doi: 10.22075/ppam.2022.25821.1019

Sahaya Infant Lasalle, B., Kamalesh, T., Karuppasamy, P., Senthil Pandian, M., Ramasamy, P. (2022). 'Growth and Characterization of 1, 2, 3- Benzotriazole 2-chloro 4-nitrobenzoic Acid (BCNB) Single Crystal for NLO Applications', Progress in Physics of Applied Materials, 2(1), pp. 21-25. doi: 10.22075/ppam.2022.26678.1025

mansouri, M., Rezagholipour Dizaji, H., Saeidi, M. R., Vaezzadeh, M. (2022). 'Electron Gas Hardness of Individual Carbon Nanotubes', Progress in Physics of Applied Materials, 2(1), pp. 27-34. doi: 10.22075/ppam.2022.26701.1026

Alamdari, S., Haji Ebrahimi, M., Mirzaee, O., Jafar Tafreshi, M., Majlesara, M. H., Tajali, M., Sasani Ghamsari, M., Mohammadi, A. (2022). 'Cerium doped Tungsten-Based Compounds for Thermoluminescence Application', Progress in Physics of Applied Materials, 2(1), pp. 35-40. doi: 10.22075/ppam.2022.27086.1028

Esmaeili, S., Aghazadeh, M., karimzadeh, I., Shokrian, F. (2022). 'The effect of different substitutions (Eu, Ce, Al, and Bi) on the structural and magnetic properties of Fe3O4', Progress in Physics of Applied Materials, 2(1), pp. 41-47. doi: 10.22075/ppam.2022.27100.1029

kafi ahmadi, L., khademinia, S. (2022). 'Fabrication of 3,4-dihydropyrimidin-2-(1H)-ones/thione compounds via Cu2V2O7 nanocatalyst synthesized by solid state method', Progress in Physics of Applied Materials, 2(1), pp. 49-56. doi: 10.22075/ppam.2022.27811.1032

pazouki, S., Memarian, N. (2022). 'Improving the efficiency of dye sensitized solar cell with Titanium doping of Tin oxide photoanode', Progress in Physics of Applied Materials, 2(1), pp. 57-61. doi: 10.22075/ppam.2022.28325.1034

Hadilou, S., Behzad, M., Khademinia, S. (2022). 'Solid state and hydrothermal synthesis, characterization and optical properties of Yb2V2O7', Progress in Physics of Applied Materials, 2(1), pp. 63-69. doi: 10.22075/ppam.2022.25660.1018

Shojaei, S. H. R., Oloumi, M. (2022). 'First–Principles Calculations of Band Offsets in GaAs/AlAs System', Progress in Physics of Applied Materials, 2(1), pp. 71-75. doi: 10.22075/ppam.2022.25847.1021

Salehi, S., Aghazadeh, M., Karimzadeh, I. (2022). 'Zn-MOF electrode material for supercapacitor applications', Progress in Physics of Applied Materials, 2(1), pp. 77-82. doi: 10.22075/ppam.2022.28846.1036

Volume 1 issue 1 (2021)

Kalami, R., Ketabi, S. A. (2021). 'Spin-dependent thermoelectric properties of a magnetized zigzag graphene nanoribbon', Progress in Physics of Applied Materials, 1(1), pp. 1-6. doi: 10.22075/ppam.2021.23053.1004

Zarei Moghadam, R., Omrany, A. H., Taherkhani, M., Shokrian, F. (2021). 'Fabrication of multi-layer antireflection coating consisting of ZnS and MgF2', Progress in Physics of Applied Materials, 1(1), pp. 7-13. doi: 10.22075/ppam.2021.23357.1005

Alamdari, S., Jafar Tafreshi, M., Sasani Ghamsari, M., Majles Ara, M. H. (2021). 'Preparation and Characterization of ZnO and CdWO4 Nanopowders for Radiation Sensing', Progress in Physics of Applied Materials, 1(1), pp. 14-18. doi: 10.22075/ppam.2021.23502.1007

Choupani, M., Gholizadeh, A. (2021). 'The effect of calcination temperature on the X-ray peak broadening of t-CuFe2O4', Progress in Physics of Applied Materials, 1(1), pp. 19-24. doi: 10.22075/ppam.2021.23435.1006

Zhour, K., Asadi, H., Almasi, S. (2021). 'Tuning plasmon frequency by the external electric field and its applications', Progress in Physics of Applied Materials, 1(1), pp. 25-30. doi: 10.22075/ppam.2021.23070.1003

Jamali, N., Bagheri-Mohagheghi, M. M. (2021). 'Effect of Tetraethyl-Orthosilicate, 3-Aminopropyl‌triethoxysilane and Polyvinylpyrrolidone for synthesis of SiO2@Ag core-shell nanoparticles prepared by chemical reduction method', Progress in Physics of Applied Materials, 1(1), pp. 31-38. doi: 10.22075/ppam.2021.23618.1008

Raoufi, T., Shokrian, F. (2021). 'Study of Landau theory and universal curve on La0.6-xGdxSr0.4MnO3 (x= 0 - 0.1) manganite', Progress in Physics of Applied Materials, 1(1), pp. 39-43. doi: 10.22075/ppam.2021.23933.1010

Tavakoli, M., Karbaschi, H. (2021). 'Numerical study of influences of the input current frequency on the induction heating process', Progress in Physics of Applied Materials, 1(1), pp. 44-49. doi: 10.22075/ppam.2021.23704.1009

Ghorbani, H., Eshraghi, M., Sabouri, A. A. (2021). 'Magnetic properties of Co0.9Cd0.1Fe1.9X0.1O4 (X = Cr, Yb) nanoparticles prepared by hydrothermal method', Progress in Physics of Applied Materials, 1(1), pp. 50-56. doi: 10.22075/ppam.2021.23974.1011

Haji Taghi Tehrani, D., solaimani, M. (2021). 'Light propagation and optical filtering properties of one dimensional Pascal plasma photonic multilayers', Progress in Physics of Applied Materials, 1(1), pp. 57-62. doi: 10.22075/ppam.2021.24218.1013

Azadi, M., Rezanezhad, S., Ashraf Talesh, S. A., Ivanov, K., Teresov, A. (2021). 'The effect of pulsed electron beam irradiation on surface characteristics of AM60 magnesium alloy', Progress in Physics of Applied Materials, 1(1), pp. 63-73. doi: 10.22075/ppam.2021.24156.1012

Mahdavi, M., Kimiagar, S., Abrinaei, F. (2021). 'The effect of liquid nitrogen-microwave treatments on the structural, optical, and tribological properties of WS2 nanoflakes', Progress in Physics of Applied Materials, 1(1), pp. 74-82. doi: 10.22075/ppam.2021.24535.1015