Hydrothermal synthesis of Fe3 O4-ZnO nanocomposites for removing fluoride from water

Document Type : Original Article

Authors

1 Nanophysics Research lab (NRL), Physics Department, Faculty of Science, Central Tehran Branch, Islamic Azad university

2 Physics Department, Pontifical Catholic University of Rio de Janeiro (PUC-Rio), Rio de Janeiro, 22451-900, Brazil

3 Department of Physics, Central Tehran Branch, Islamic Azad University, Tehran, Iran

Abstract

Numerous nations are grappling with a significant challenge related to the prevalence of fluorosis, stemming from elevated fluoride levels in drinking water. This study aims to investigate avenues for eliminating fluoride from water solutions utilizing cost-effective, nontoxic, and readily available adsorbents. In this research, -ZnO nanocomposites were synthesized using the hydrothermal method which is a simple and environmentally friendly method that can be easily performed on a large scale. X-Ray diffraction analysis and Williamson-Hall plots were used to study the phase purity, crystallite size, strain, lattice constant, and d-spacing of the samples. The morphology of the samples was investigated through Scanning Electron Microscopy and Transmission Electron Microscope. The formation of nanocomposites was investigated by Vibrating Sample Magnetometer analyses. The -ZnO nanocomposites were then used for fluoride removal from water. The results showed that -ZnO-2 could absorb 78% of the fluoride after 80 minutes. Then, -ZnO-2 was collected using a magnet within 50 seconds. These results are important in that, despite their simplicity, it has no side effects on the environment.

Keywords

Main Subjects


© 2024 The Author(s). Journal of Progress in Physics of Applied Materials published by Semnan University Press. This is an open access article under the CC-BY 4.0 license. (https://creativecommons.org/licenses/by/4.0/)

[1]     Walker, D.B., Baumgartner, D.J., Gerba, C.P. and Fitzsimmons, K., 2019. Surface water pollution. In Environmental and pollution science (pp. 261-292). Academic Press.
[2]    Karn, S.K. and Harada, H., 2001. Surface water pollution in three urban territories of Nepal, India, and Bangladesh. Environmental management, 28, pp.483-496.
[3]  Roy, S. and Dass, G., 2013. Fluoride contamination in drinking water–a review. Resour. Environ, 3(3), pp.53-58.
[4]   Vithanage, M. and Bhattacharya, P., 2015. Fluoride in the environment: sources, distribution and defluoridation. Environmental Chemistry Letters, 13, pp.131-147.
[5]  Kumar, P.S., Suganya, S., Srinivas, S., Priyadharshini, S., Karthika, M., Karishma Sri, R., Swetha, V., Naushad, M. and Lichtfouse, E., 2019. Treatment of fluoride-contaminated water. A review. Environmental Chemistry Letters, 17, pp.1707-1726.
[6]     Shaji, E., Sarath, K.V., Santosh, M., Krishnaprasad, P.K., Arya, B.K. and Babu, M.S., 2024. Fluoride contamination in groundwater: A global review of the status, processes, challenges, and remedial measures. Geoscience Frontiers, 15(2), p.101734.
[7]     Kumar, A., Balouch, A. and Abdullah, 2021. Remediation of toxic fluoride from aqueous media by various techniques. International Journal of Environmental Analytical Chemistry, 101(4), pp.482-505.
[8]   Ghorai, S. and Pant, K.K., 2005. Equilibrium, kinetics and breakthrough studies for adsorption of fluoride on activated alumina. Separation and purification technology, 42(3), pp.265-271.
[9]   Damtie, M.M., Woo, Y.C., Kim, B., Hailemariam, R.H., Park, K.D., Shon, H.K., Park, C. and Choi, J.S., 2019. Removal of fluoride in membrane-based water and wastewater treatment technologies: Performance review. Journal of environmental management, 251, p.109524.
[10] Sandoval, M.A. and Domínguez-Jaimes, L.P., 2024. Fluoride removal from drinking water by electrocoagulation process: recent studies, modeling, and simulation through computational fluid dynamics approach. In Advances in Drinking Water Purification (pp. 163-179). Elsevier.
[11] Grzegorzek, M., Majewska-Nowak, K. and Ahmed, A.E., 2020. Removal of fluoride from multicomponent water solutions with the use of monovalent selective ion-exchange membranes. Science of the total environment, 722, p.137681.
[12]  Ozairi, N., Mousavi, S.A., Samadi, M.T., Seidmohammadi, A. and Nayeri, D., 2020. Removal of fluoride from water using coagulation-flocculation process: a comparative study. Desalin. Water Treat., 180, pp.265-270.
[13] Fito, J., Said, H., Feleke, S. and Worku, A., 2019. Fluoride removal from aqueous solution onto activated carbon of Catha edulis through the adsorption treatment technology. Environmental Systems Research, 8(1), pp.1-10.
[14] Bhaumik, M., Leswifi, T.Y., Maity, A., Srinivasu, V.V. and Onyango, M.S., 2011. Removal of fluoride from aqueous solution by polypyrrole/Fe3O4 magnetic nanocomposite. Journal of hazardous materials, 186(1), pp.150-159.
[15] Chai, L., Wang, Y., Zhao, N., Yang, W. and You, X., 2013. Sulfate-doped Fe3O4/Al2O3 nanoparticles as a novel adsorbent for fluoride removal from drinking water. Water research, 47(12), pp.4040-4049.
[16]  Abharya, A. and Gholizadeh, A., 2021. Synthesis of a Fe3O4-rGO-ZnO-catalyzed photo-Fenton system with enhanced photocatalytic performance. Ceramics International, 47(9), pp.12010-12019.
[17] Abharya, A. and Gholizadeh, A., 2020. Structural, optical and magnetic feature of core-shell nanostructured Fe3O4@ GO in photocatalytic activity. Iran. J. Chem. Chem. Eng. Research Article Vol, 39(2).
[18] Sihag, S. and Pal, J., 2023. Synthesis and characterization of zinc oxide nanocomposite for fluoride ion removal from aqueous solution. Environmental Monitoring and Assessment, 195(10), p.1205.
[19] Sarma, G.K., Sharma, R., Saikia, R., Borgohain, X., Iraqui, S., Bhattacharyya, K.G. and Rashid, M.H., 2020. Facile synthesis of chitosan-modified ZnO/ZnFe 2 O 4 nanocomposites for effective remediation of groundwater fluoride. Environmental Science and Pollution Research, 27, pp.30067-30080.
[20] Roychowdhury, A., Pati, S.P., Mishra, A.K., Kumar, S. and Das, D., 2013. Magnetically addressable fluorescent Fe3O4/ZnO nanocomposites: structural, optical and magnetization studies. Journal of Physics and Chemistry of Solids, 74(6), pp.811-818.
[21] Si, R., Zhang, Y.W., Li, S.J., Lin, B.X. and Yan, C.H., 2004. Urea-Based Hydrothermally Derived Homogeneous Nanostructured Ce1-x Zr x O2 (x= 0− 0.8) Solid Solutions: A Strong Correlation between Oxygen Storage Capacity and Lattice Strain. The Journal of Physical Chemistry B, 108(33), pp.12481-12488.
[22] Irandoust, R. and Gholizadeh, A., 2020. A comparative study of the effect of the non-magnetic and magnetic trivalent rare-earth ion substitutions on bismuth ferrite properties: Correlation between the crystal structure and physical properties. Solid State Sciences, 101, p.106142.
[23] Gholizadeh, A., 2017. A comparative study of physical properties in Fe3O4 nanoparticles prepared by coprecipitation and citrate methods. Journal of the american ceramic society, 100(8), pp.3577-3588.
[24] Elmahaishi, M.F., Ismail, I. and Muhammad, F.D., 2022. A review on electromagnetic microwave absorption properties: their materials and performance. Journal of Materials Research and Technology, 20, pp.2188-2220.
[25] Mojahed, M., Dizaji, H.R. and Gholizadeh, A., 2022. Structural, magnetic, and dielectric properties of Ni/Zn co-substituted CuFe2O4 nanoparticles. Physica B: Condensed Matter, 646, p.414337.
[26] Hashim, M., Kumar, S., Shirsath, S.E., Kotnala, R.K., Shah, J. and Kumar, R., 2013. Synthesis and characterizations of Ni2+ substituted cobalt ferrite nanoparticles. Materials Chemistry and Physics, 139(2-3), pp.364-374.
[27] Saffari, F., Kameli, P., Rahimi, M., Ahmadvand, H. and Salamati, H., 2015. Effects of Co-substitution on the structural and magnetic properties of NiCoxFe2− xO4 ferrite nanoparticles. Ceramics International, 41(6), pp.7352-7358.